User guide

Word Addr Bit R/W Name Description
0x4D3
9:0
RW ber_time_frames Specifies the number of training frames to examine
for bit errors on the link for each step of the
equalization settings. Used only when ber_time_k_
frames is 0.The following values are defined:
• A value of 2 is about 10
3
bytes
• A value of 20 is about 10
4
bytes
• A value of 200 is about 10
5
bytes
The default value for simulation is 2'b11. The
default value for hardware is 0.
19:10 RW ber_time_k_frames Specifies the number of thousands of training
frames to examine for bit errors on the link for
each step of the equalization settings. Set ber_time_
m_frames = 0 for time/bits to match the following
values:
• A value of 3 is about 10
7
bits = about 1.3 ms
• A value of 25 is about 10
8
bits = about 11ms
• A value of 250 is about 10
9
bits = about 11 0ms
The default value for simulation is 0. The default
value for hardware is 0x415.
29:20 RW ber_time_m_frames Specifies the number of millions of training frames
to examine for bit errors on the link for each step
of the equalization settings. Set ber_time_k_frames
= 4'd1000 = 0x43E8 for time/bits to match the
following values:
• A value of 3 is about 10
10
bits = about 1.3
seconds
• A value of 25 is about 10
11
bits = about 11
seconds
• A value of 250 is about 10
12
bits = about 110
seconds
UG-01143
2015.05.11
10GBASE-KR PHY Register Definitions
2-153
Implementing Protocols in Arria 10 Transceivers
Altera Corporation
Send Feedback