MSDS

MATERIAL DATA SAFETY SHEET
PRODUCT NAME: Chrome FX Basecoat/Topcoat Hardener
PRODUCT CODE: CFX-BH712/CFX-TC520 DATE: Jan. 1, 2012
Page 1 of 6
SECTION I – MANUFACTURER IDENTIFICATION
MANUFACTURED FOR : Alsa Refinish LLC
1213 E. 58
th
Pl.
Los Angeles, CA 90001
Tel: [phone]
Fax: [phone]
Infotrac Chemical Emergency Response: 800-535-5053/352-323-3500
SECTION II – COMPOSITION/INFORMATION ON INGREDIENTS
NAMES CAS NUMBER EINECS-No. CONC.
hexamethylene diisocyanate polymer 3779-63-3 223-242-0 40-60
4-chloro-a,a,a,-trifuorotoluene 98-56-6 202-681-1 1-5
methyl acetate 79-20-9 201-185-2 20-40
petroleum solvent lt. aromatic 64742-95-6 265-199-0 1-5
1,2,4, trimethyl benzene 95-63-6 202-436-9 0.1-1
hexamthylene diisocyanate 822-06-0 212-485-8 0.1-1
n-butyl acetate 123-86-4 204-658-1 1-5
SECTION III – HAZARDS IDENTIFICATION OF THE PREPARATION
Danger classification : Xi Irritant
11 highly flammable
43 may cause sensitization by skin contact
66 repeated exposure may cause skin dryness or cracking.
67 vapors may cause drowsiness and dizziness.
SECTION IV – FIRST AID MEASURES
General:
In all cases of doubt, or when symptoms persist, seek medical attention.
Never give anything by mouth to an unconscious person.
Inhalation:
Remove to fresh air, keep patient warm and at rest, if breathing is irregular or stopped,
administer artificial respiration. Give nothing by mouth. If unconscious place in recovery
position and seek medical advice.
Eye contact:
Remove contact lenses, irrigate copiously with clean, fresh water for at least 10 minutes, holding
the eyelids apart and seek medical advice.
Skin contact:
Remove contaminated clothing. Wash skin thoroughly with soap and water or use recognized
skin cleanser. Do not use solvents or thinners.
Ingestion:
If accidentally swallowed obtain immediate medical attention. Keep at rest. Do not induce
vomiting.
SECTION V – FIRE-FIGHTING MEASURES