Owner's Manual

21
4. Click “Reset EQ”, all the equalizers of the
current channel are reset to the initial state:
the frequency is evenly distributed, the
input Q value is 2.515, the output Q value is
2.201, and the gain is 0.0 dB.
5. Click “P.EQ”, a warning dialog box appears,
indicating “Are you sure you want to switch
from the G.EQ mode to the P.EQ mode?”,
press “Conrm” to switch to the “P.EQ”
mode. Click “G.EQ”, a warning dialog box
appears, indicating “Are you sure you
want to switch from the P.EQ mode to the
G.EQ mode?”, Press “Conrm” to switch
to the “P.EQ” mode. In the P.EQ mode,
the frequency, Q value, and gain can be
adjusted, while in the G.EQ mode, the
frequency and Q value are xed and only
the gain of the EQ can be adjusted.
Setting the Channel Phase and
Volume
1. Phase: Click the positive phase icon “
” or the negative phase icon “ ” to switch
between the positive and negative phases.
Move the mouse to a phase icon to view the
curve of the phase.
2. Volume: the channel volume can be set
by directly entering the value, scrolling the
mouse wheel, or pressing the Up/Down
keys on the keyboard. The default volume
value is 0dB (Adjustment range: -60 dB–6
dB).
3. Mute: Click the volume icon “ ” to mute
the channel “ ”.
Setting the Channel Link
Link: The input link settings include Channel
EQ, X-Over, Channel Mute, Channel Phase and
Channel Volume; the output link settings include
Channel EQ, X-Over, Channel Mute, Channel
Phase, Channel Volume, and Channel Delay.
1. Link setting box:
(1) Set the input or output functions to be
tuned in the interface;
(2) Right-click the link settings in the input
channel area, the input link setting box
appears; right-click the link settings in
the output channel area, the output link
setting box appears.
2. Link setting:
Click the Link button “ ”, the Link button
is highlighted (the icon turns blue);
indicates that it is in the link state.
Setting the Delay
Click the Delay button “ ”, the output signal
delay adjustment interface appears.
1. Delay unit: ms, cm, in;
Delay range: 0.000-20.000 ms;
0-692 cm;
0-273 in.
2. The delay can be set by directly entering
the value, scrolling the mouse wheel,
or pressing the Up/Down keys on the
keyboard.
Software for PC