Operation Manual

ALPINE HCE-C305R_EN 68-23120Z52-A (A5)
23-EN
y
r
a
a
ng
A Power cable
B Switched Power Lead (Ignition)
Connect this lead to an open terminal on the
vehicle’s fuse box or another unused power
source which provides (+)12V only when
the ignition is turned on or in the accessory
position.
C Battery Lead
Connect this lead to the positive (+) post of
the vehicle’s battery.
D Fuse 7.5A
E Ground Lead
Connect this lead to a good chassis ground on
the vehicle. Make sure the connection is made
to bare metal and is securely fastened using
the sheet metal screw provided.
F Reverse Input Lead
Connect to the plus side of the car’s reverse
lamp that lights when the transmission is
shifted into reverse (R).
Switches the video picture to the rearview
camera. This is achieved by putting the car
into reverse (R).
G Camera Control Lead
Use to connect with products that do not
have the camera screen display function other
than the linkage with the gear lever shifted
into the reverse position (R).
H Video Output Connector (Yellow)
Connects to the Video Input Connector when
connecting with the navigation or monitor
that has no direct camera input connector.
I Switch Connector
J Buzzer Connector
K Rear Camera Input Connector
L SETUP switch (ON/OFF)
Use this switch when calibration is performed.