Owner's Manual
Table Of Contents
- Owner's Manual
- Operating Instructions
- 1. Product overview
- 2. Installing the product
- 3. Using recording features
- 4. Operating on the Alpine navigation/display audio system
- 5. Settings
- 6. Using the mobile viewer
- 7. Using the PC viewer
- 8. Upgrading the firmware
- 9. Troubleshooting
- 10. Specifications
- Quick Reference Guide
- WiFi Network Information
- Warranty
20
3. Using recording features
3.1 Turning the product on or off
The product is turned on automatically and continuous recording starts when you turn on the ACC or start
the engine. To power off the product, press and hold the Power button. To turn the power back on, press the
Power button again.
Wait until the product is completely booted up after turning it on, and then begin operating the vehicle. The
video recording does not begin until the product is completely turned on (booted up).
3.2 Learning about file storage locations
Videos are stored in the following folders according to their recording mode.
The Alpine
navigation/display
audio system
Continuous
Continuous
Incident
Manual Recording Motion Detection Parking Incident
In the memory
card
cont_rec evt_rec manual_rec
motion_
timelapse_rec
parking_rec
Play videos on Window/Mac computer or using the ALPINE Recording Viewer application. If you play videos
by inserting the memory card in devices such as a smartphone or a tablet PC, the video files may be lost.
A file name is composed of the recording start date and time, and the recording option.
REC_2020_07_01_10_25_30_
F
REC_2020_07_01_10_25_30_R
REC_2019_07_01_10_25_30_GS.MP4
Recording conditions
• F: Front camera
• R: Rear camera