Owner`s manual

26-EN
MANUAL:
The display is scrolled when a disc is loaded or when a track is
changed, etc.
Note
• The unit scrolls CD text names, folder names, file names or tag display.
Scroll Type Setting
Choose from two scrolling methods. Select the type you prefer.
 Setting item: SCROLLTYPE
Setting contents:
TYPE1 (Initial setting) / TYPE2
TYPE1:
The characters scroll from right to left, a single character at a time.
TYPE2:
Words are built up from left to right, a single character at a time.
When the display is filled, it is cleared and the remaining words are
displayed the same way until all words of the title have been
shown.
TUNER is selected on the setup main menu in step 2.
Setting the TUNER (FM) tone quality (FM SET)
This unit can set your preferred tonal quality for the FM analog radio
stations.
 Setting item: FM SET
Setting contents:
HI-FI / NORMAL (Initial setting) / STABLE
HI-FI:
High-quality setting
NORMAL:
Standard setting
STABLE:
Control noise
Note
• Noise may be more noticeable when HI-FI is set, depending on the
reception status. In this case, the Normal setting is recommended.
“IPOD & USB” is selected on the setup main menu in step 2.
Setting the USB Skip function
During searching, you can skip over designated folders/files by pressing
and holding . For example, if you select 10 FILE in the searching
mode, by pressing and holding  you can skip backward 10 folders/files
from the current folder/file; by pressing and holding  you can skip
forward 10 folders/files from the current folder/file. If the folders/files
searched are less than the assigned skipped-over ones, pressing and
holding  will skip to the first or last folder/file.
 Setting item: USB SKIP
Setting contents:
10 FILE (Initial setting) / 20 FILE / 50 FILE / 100 FILE
iPod/iPhone Search Mode Setting
The unit allows you to search for the iPod/iPhone using nine different
search modes.
 Setting item: IPOD LIST
 Further setting items: PLAYLISTS / ARTISTS /ALBUMS /
AUDIOBOOKS / PODCASTS / GENRES / COMPOSERS / SONGS /
GENIUS MIX
Setting contents:
OFF / ON
Notes
• The search mode for Playlists/Artists/Albums/Podcasts/Genres/Songs/
Genius Mix is initially set to On. The search mode for Audiobooks/
Composers is initially set to Off.
• For search mode details, refer to “Searching for a desired Song” on
page 36.
APP is selected on the setup main menu in step 2.
Setting the communication mode with a
Smartphone (ALPINE APP)
Set ALPINE APP to USB when an iPhone is connected, or set to BT
when an android Smartphone is paired.
 Setting item: ALPINE APP
Setting contents:
USB (Initial setting) / BT / OFF
USB:
When an iPhone is connected to CDE-147BT’s USB port, you can
enjoy Pandora programme the unit’s sound tuning parameters, or
communicate with SNS.
BT:
Set this when an android Smartphone is paired with this unit via
BLUETOOTH technology. At this time, you can enjoy Pandora,
programme the unit’s sound tuning parameters, or communicate
with SNS.
OFF:
No Smartphone is connected.
Notes
• After the above setting, turn the ignition key off (ACC OFF) and on
again (ACC ON).
• For this function to work properly, specific applications must be
installed on your Smartphone before connection. Consult your Alpine
dealer or the Alpine web site for details.
• Only the iPhone and certain Android Smartphones support this
function.
Setting the TTS (Text To Speech) volume
This function allows for readout of comments, etc., on a Smartphone,
and outputs sound from the speaker of the unit.
 Setting item: TTS VOLUME
Setting contents:
0 ~ 35
Note
• The initial volume level is 12.
Tuner Setting
USB and iPod Setting
Application Setting (APP)