Owner's Manual

19-EN
Setting the AUX+ SETUP Mode
An external device (such as a portable music player) can be connected
to the Full Speed connector of this unit. A conversion cable
(KCE-237B) for building up the AUX IN (optional) is required.
A portable music device and an iPod/iPhone cannot be connected to the
Full Speed connector at the same time.
You can change the AUX+ name display when AUX+ SETUP is set to
ON. Press //
ENT when AUX+ SETUP is set to ON, and select
AUX+ NAME by turning the Rotary encoder, then press //
ENT.
After that, turn the Rotary encoder to select the desired AUX+ name.
Setting the AUX NAME mode
You can change the AUX NAME display in the SETUP mode.
*
1
After the setting is completed, AUX is displayed on the unit.
*
2
After the setting is completed, PMD is displayed on the unit.
Setup Before Using
BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices.
Depending on the BLUETOOTH version, a BLUETOOTH
compatible device may not be able to communicate with this unit.
Proper function of this unit with all BLUETOOTH compatible
devices is not guaranteed. For handling of the BT compatible device,
consult your ALPINE dealer or ALPINE website.
Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
When you place a call, or perform setup operations, be sure to stop
your car in a safe place.
Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the
connected device(s).
Before using the hands-free phone function, the following settings need
to be made.
Set “BT IN” to BT ADAPTER (page 17).
Before using a hands-free phone, it must be paired with this unit.
Refer to “BLUETOOTH SETUP” (pages 20-21).
AUX+ ON / AUX+ OFF (Initial setting)
AUX+ ON: Set to ON when a portable device is connected. If
SOURCE/ is pressed and AUX+ is selected, the
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPod/iPhone is connected.
AUXILIARY*
1
(Initial setting) / TV / DVD / PORTABLE*
2
/ GAME
BT Hands-Free
Calling
About BLUETOOTH
Before Using Hands-Free Function
Rotary encoder
/VOICE DIAL
SOUND/SETUP
2 (ABC)
/MUTE/
1 (ABC)
//ENT