Purchased your product online? We would really appreciate it if you can share your experience with others by reviewing our product on the website from which you purchased. Owner’s Manual Item # GEM122 Buddha Fountain with LED Lights Have Questions or Issues? Need help with assembly? Contact us and we will resolve them within 12 hours. Support Hours: M-F 7:30–5:00 (U.S. Pacific Time) Call: 877-460-4511 Email: info@alpine4u.com V4.
NOTES CONTENTS Contents ………………………………………..1 What’s Included……………...…………………2 Features…………………………………………3 Specifications…………………………………...3 Assembling & Using Your Product…..……….4 Replacement Parts…………………………….8 Troubleshooting….…………………………….9 Caution………..……………………………….10 Warranty……………………………………….11 Notes…………………………………………...
WHAT’S INCLUDED LIMITED WARRANTY INFORMATION Thank you for choosing an Alpine product! We aim to please with our wide range of products including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials. In the event that we have not achieved our usual standard of excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of purchase, with the purchase date clearly indicated, must be provided.
REPLACEMENT PART • • ITEM# Pump and Light Kit…………….……..GEM122-KIT Transformer…………………………………PL022T 3. Connect the vinyl tubing from the bottom of the Fountain Top to the hose bib on the pump. ALSO AVAILABLE FROM ALPINE • Fountain Care Formula…………….….PPL102 Foam and scale remover for indoor and outdoor fountains. • Americana® UV Acrylic Sealer ...……RRR106 Provides protective clear coating for all painted surfaces. • Touch Up Paint Kit....………………....RTD102 4.
. Place the Fountain Top on to the Fountain Base. Make sure the Power Cord runs through the rear cord slot on the Fountain Base. 7. Gently pour water into the fountain basin, being careful not to overflow and cause splashing. Make sure the water completely submerges the pump and the water runs clear during operation. 8. Plug the pump cord into your local power supply. Make sure that there is no water around the plug & always keep the power source in a dry place. 9.
ASSEMBLING & USING YOUR PRODUCT Unpack all components carefully. Please check to ensure all parts have been removed from the packaging. *Some splashing may occur when the product is in use. 1. Place the Fountain Base on a smooth and level surface. Allow enough space to access the pump. 2. Remove the pump from its packaging and adjust the flow control to the lowest setting to avoid splashing until the fountain is completely assembled. Alpine Quick Tip #1 Switch to the Right/ to turn down the water flow.
CAUTION FEATURES • • Always unplug the pump from the electrical outlet before cleaning & handling • Use with clean water only, do not place the fountain and/or parts in any other liquid.
