Data Sheet

Product Specification Sheet APS532 - Rev. 07/2013
KM / KM-C Series Camera Modules (For modular door stations)KM / KM-C Series Camera Modules (For modular door stations)
387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]
Web: www.canalalarm.comWeb: www.canalalarm.com
Copyright© 1998-2017 Alpha Communications® - All Rights Reserved.
Due to continuous product improvement, all colors, sizes, materials, finishes and specifications are subject to change without notice.
(Titanium finish shown)
KM / KM-C Series Camera Module for KM / KM-C Series Camera Module for Modular Series DoorModular Series Door
StationsStations
The KM series camera modules are designed to be used with Alpha Communications®
/ S.T.R.™ modular series door entry stations.
The KM series is a Black and White camera, and the KM-C series is a Color camera.
Both models feature a 3.6mm lens and 92 degree angle of view (side to side) and 700
lines of resolution. The KM features a luminous sensitivity of 0.8 Lux and the KM-C
features a luminous sensitivity of 2.5 Lux. Both models also features built-in
Infrared Illuminators. All versions operate on 15-18VDC (150mA) (as provided by
power supply model # NGC20 or equivalent) and provide a video output of 1Vpp into
75 ohms.
All KM camera modules are available in three (3) finishes; Titanium (suffix-T), White
(suffix-W) or Brown (suffix-B).
All KM camera modules are 3.94"w x 3.94"h (100mm x 100mm), and are made to snap
into the MT series modular panel trim frame(s).
Recommended mounting height to center of camera lens is approx. 5 feet (1.55
meters) from finished floor.
To service the KM series camera modules, once installed, use the model 13510 key /
tool unit.
Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications
Camera module(s) shall be Alpha Communications® / S.T.R.™ KM (Black and White) or KM-C (Color) series or approved equal. Camera
module(s) shall snap into the corresponding MT series modular panel frame(s).
Camera module(s) shall be finished in Titanium (suffix-T), White (suffix-W) or Brown (suffix-B), and shall feature a 3.6mm lens, 92 degree
angle of view (side to side) and 700 lines of resolution. Camera module shall also feature built-in InfraredIlluminators. Recommended mounting
height to center of camera lens is approx. 5 feet (1.55 meters) from finished floor.
Contractor shall observe all local and national electrical and building codes