Instructions / Assembly

ManualsBrandsALLURE IRON DOORS & WINDOWS ManualsDoors & Windows72 in. x 108 in. Lauderdale Right-Hand Outswing Painted Iron Prehung Front Door 3/4-Lite Hammered Glass and Hardware

Door Installation Guide

1. Your'rough'opening'(r/o)'or'buck'to'buck'(picture'1)'opening'should'be'at'least'1"'wider'then'the'overall'jamb'width'and'½”'taller'then 'the'jam b

height.'This'will'give'you'½”'shim'space'on'the'left,'the'right,'and'the'top'of'the'frame'to'make'it'plumb,'square'and'true'for'ev en 're ve a ls'on 'd oo rs .

2. Buck'system'or'framing'that'you'will'be'securing'the'door'frame'to's ho u ld 'be 'solid 'a n d'fre e'o f'd amage'(d ry'rot'etc.).'The'sa me'ap p li es'if'the'fame

is'to'be'm o un t ed 'd ire ct ly'to 'm a s on ry 'o r'b loc k 'w a ll.

3. Take'note'of'any'alarm'or'security'wires'(picture'2)'that'will'have'to'be'drilled'/'installed 'into'the'frame'before'installing'frame.

4. Place'the'door'frame'o r'jamb'into'y ou r'r ou g h 'op en in g'making'sure'the'threshold'is'seated 'fla t'on 'th e 'floo r'(picture'3),'keepin g 'in'mind 't h a t 't h e

exterior'door'sill'may'not'be'level'with'the'interior'flooring'and'some'flooring'might'need'to'be'cut'back'or'sill'raised.

Picture 1

Picture 2

Picture 3

Picture 4

Picture 5

Picture 6

5. After'shimming'frame/jamb'to'your'rough'opening'(picture'4)'making'sure'its'plum,'square,'and'true'predrill'for'lag'screws'(picture'5)'or

Tapcons'(picture'6)'depending'on'your'application.

Summary of content (2 pages)

PAGE 1
Door Installation Guide 1. Your rough opening (r/o) or buck to buck (picture 1) opening should be at least 1" wider then the overall jamb width and ½” taller then the jamb height. This will give you ½” shim space on the left, the right, and the top of the frame to make it plumb, square and true for even reveals on doors. 2.
PAGE 2
6. You are ready to hang the doors on the hinges. Make sure the the brass washers are on the hinge pins (picture 6a). before hanging the door. We recommend carefully removing the operable glass panes from the door to make them lighter before lifting the door onto the hinges (picture 6b).