User Manual ALL4076
ALL4076 WEB POWER STRIP 1. 8.
ALL4076 WEB -‐ Power Strip Connectors overview Contents Delivery Please check the packaging and its content first: > Is there something on the packaging that was damaged by shipping? > Do you recognize if the case shows traces of use? In case of damaged, do not let the device running. Please, if you have doubts do not hesitate to contact our Technical Service.
Customizing the ALL4076 to your network Initial connection using LAN cable Power: Power ON displayed Activity: Flashing when unit is started. Manuel button: Button for manual switching of socket. Schuko plugs: 6x push sockets max. 10A 1. Connect your ALL4076 to your Ethernet switch using the attached LAN cable. Make sure that the connector is well connected. 2. Connection between ALL4076 and your PC / MAC: the ALL4076 communicates using the TCP/IPprotocol with the connected device.
LAN Setup Setting the IP address and network access parameters In your Web browser, enter please the address of the ALL4076 Web Power strip. Option under „Configuration“ > „LAN setting“ WLAN Setup Configure the WLAN Parameters In your Web browser, enter the web address of the ALL4076 Web Power strip. Settings under "Configuration"> "WLAN settings". WLAN Mode Selection Select the operating mode for WLAN. There are 3 options available. - Power off. WLAN is disabled. (Default setting) - Access Point.
LAN connection. E.G. from your phone via Wi-Fi. For this mode, has sense to activate the DHCP server. The description is given in a later chapter. Wireless Client When operating as a wireless client, you can by clicking the "Search Access Point", search in the area for available wireless access points and display them. Simply press the button "Select" in the appropriate line, to connect with wireless network. All data except of the encryption key will be taken.
ALL4076 Configuration After entering the parameters press "Save settings". The ALL4076 automatically restarts. After about 90sec should the ALL4076, with the new parameters, be accessible via WLAN. DHCP Server In your Web browser, enter the address of the ALL4076 WEB socket. Settings under "Configuration" -> "Device Settings" Here you can configure the settings for each output. Note that each output can be switched individually. Settings under "Configuration" -> "DHCP server".
Ø Security Here you can configure the settings for the operating time of the manual switch. In the example, this output for the impulse is set to 200sec. After changing parameters press "Save settings".
Switching trigger: Both The evaluation of temperature and humidity will be carried out. Environmental Control By Enviromental Control, you can evaluate the signals of a sensor for temperature and humidity to check their output. This tab is available only when a sensor is located on the ALL4076 socket. Note: The control of output related to temperature and/or humidity can be done following different possibility: The icon on the main page, the button on the ALL4076 WEB power strip and through a timer.
Interface Configuration of the interface Example of the configuration of the mainpage: Option under „Configuration“ > „Interface“ All settings here will affect the display of the main page. Display of the main page with default parameters and attached temperature and humidity sensors. 1. 2. 3. 4. 5. 6. 7. Set display width manual or automatic: Automatic means that the possible number of icons is limited by the display width in pixels (2.a). Manually defines the maximum number of icons in a row (2b).
Device Name Web Server and User Settings under „Configuration“ > „Device name“ This device name is used in the menu bar. Settings under „Configuration“ > „Web Server and Userr“ It is possible to access the website with a secure transfer (https). Additionally, a user and admin profile can be set up. Thereby it is possible to create a limit group of users. In addition, the access of normal users can be prevented working on the settings.
Device Status Date & Time Settings under "Configuration"> "Date & Time" The ALL4076 synchronizes its system time with an NTP server. The time query to the NTP happens during the boot process and all 24H. Monitoring is made by the port 123. This port must be let open on the firewall.
Update settings Independently on the previous language in the interface, the manual download will start in the appropriate language. Option under „Configuration“ > „Update settings“ It is possible to manually check for updates and install them immediately. By using the factory settings, the ALL4076 will search for update at each boot and once every 24H. There is even the option to download a firmware file directly.
Functions “Functions” offers you the opportunity to use in addition to the internal switching functions other external actors. With the ALL4076 you can control the ALL3073, ALL3075, ALL3075V2 and Plugwise actuators. To use those actuators appropriate, it is necessary to enable the various services. In addition, a time control can be set up. Plugwise Service Settings under „Functions“ > „Plugwise Service“ You need a complete Plugwise kit consisting of Plugwise Stick and Plugwise Circle and Circle +.
ALL3075 Demon Settings under „Functions“ > „ALL3075 Demon“ The ALL4076 can be extended by using the ALL3075 and ALL3075V2 actuators. The ALL3075 is an actuator and can evaluate the power consumption. The ALL3075V2 can also estimate the power consumption and even more the communication can run over LAN or WLAN. 1. 2. Delay between reads (seconds): Default = 5 Sec. In this settings, the current state of the ALL3075 will be queried every 5 seconds.
Timing Settings under "Functions" > "Timing Control" Time-dependent switching points can be created. The resolution is 1 second. A maximum of 128 control points are defined. After clicking on the plus sign in the mask is automatically opened a window to insert new set points. 1. 2. 3. Page 30 Timer: Enabled / Disabled. Timer Name: Choose a suitable name for the timers. This name will appear in the over view page.
4. Start time: Use the three sliders to select the desired time Integrated HomeAutomation XML commands The ALL4076 can show the current status using XML commands. Even the actuators can be controlled via XML. The call to http://192.168.0.100/xml shows the first page with help text. Microsoft Explorer can not display correctly the XML representation. Please use e.g. Firefox. 5. 6. 7. 8. Action: On / Off. When "On" is selected, at this moment the relay is closed.
Reset It may happen that your ALL4076 by faulty user settings is not accessible, or that a password has been set and forgot, etc. In this case you can use the following reset procedure, to reset all settings to factory default (reset the device back to factory default settings means that your values will be lost): remove the power supply from your device. Using a non-conducting pointed object (eg.
Page 36
