Manual
AT-S82 Management Software User’s Guide
47
Working with VLANs
This section contains the following procedures for working with VLANs:
“Creating a VLAN,” next
“Displaying all VLANs” on page 48
“Modifying a VLAN” on page 49
Creating a VLAN To create a VLAN, perform the following procedure:
1. From the main menu, select Static VLANs.
The 802.1Q Static VLAN page is shown in Figure 16.
Figure 16. 802.1Q Static VLAN Page
2. Click Add.
A new page opens where you specify the VLAN, as shown in
Figure 17.
Figure 17. VLAN Detail Page