Manual

Chapter 2: Basic Switch Parameters
18
Configuring the IP Address, Subnet Mask, Gateway Address, and
BOOTP or DHCP
Caution
Allied Telesis strongly recommends that you record the MAC
address of this switch, as shown on the Basic Switch Information
Page (Figure 4) before you configure or enable the BOOTP or
DHCP options of the Get IP From parameter. After you enable
either option, contact your network administrator for the IP address
from the BOOTP or DHCP server that corresponds to the switch’s
MAC address.
This procedure explains how to assign an IP address, subnet mask, and
gateway address to the switch.
To set the switch’s IP configuration, perform the following procedure:
1. From the main menu, select Basic Switch Information.
The Basic Switch Information page is shown in Figure 4.
Figure 4. Basic Switch Information Page
2. To set the switch’s IP address, in the Get IP From field, choose one of
the following from the list:
Manual - Allows you to enter static IP address information: