User's Manual

19
7
Busy Channel Lockout
BCLO is to disable transmitting while RX signal is received. Once the
channel is busy and you press PTT, the radio will beep as warning and
get back to receiving.
Press and hold
1.
key for over 2 seconds to enter setting menu.
Press
2.
/
key to choose No.10 menu, LCD displays"LOCK--
OFF".
Turn selector knob to select the desired setting.
3.
BU: Enable

BCLO, Carrier lockout, transmitting is inhibited when
current channel receives a matching
carrier.
RL: Enable

BTLO, transmitting is
inhibite d when c u rrent c h a n n el
receives a matching carrier but dis-
matching CTCSS/DCS.
OFF:

B u s y c h a n n e l l o c k o u t i s
dis a b led. I t c a n t r ansm i t i n a n y
receiving status.
Press
4.
key to conrm and exit.
In memory-mode, press and hold
1.
key for over 2 seconds to enter
setting menu.
Press
2.
/
key to choose No.11
menu, LCD displays cursor and ashing.
Turn Main Dial to select the desired letter, press
3.
key to conrm
selected letter and enter into next edition,Press
to return
forward edition.
Reverse TX/RX
Editing Channel NAME
In Frequnecy display (VFO)mode, this menu is not available.
TX frequency turns to RX frequency & RX frequency changes to TX
frequency. CTCSS/DCS setting is respected also.
Press and hold
1.
key for over 2 seconds to enter setting menu.
Press
2.
/
key to choose No.12 menu, LCD displays "REV—
OF".
Turn Main Dial to select the desired
3.
setting.
ON:Enable Frequency Reverse
OFF:Disable Frequency Reverse.
Press
4.
key to set and exit.
(Available only in Memory mode)
By Talk Around function,you can directly communicate with other radios
in your group in case the repeater is not activated or when you are out of
the repeater range. The transceiver will transmit by RX frequency with its
CTCSS/DCS signaling.
Talk Around
PARAMETER SETTING MODE
After edition, press
4.
key to exit.
Press and hold
1.
key for over 2 seconds to enter setting menu.
Press
2.
/
key to choose No.13 menu, LCD displays "TALK—
OF".