User Manual

11
&RQWUROV&RQQHFWRUVDQG'LVSOD\
&RQWURO.H\V2SHUDWLRQ0HWKRGV
There are 3 types of key operations; simply press, press after pressing [FUNC] key while FUNC appears on
the display, or press and hold.
• [Press] refers to one time quick press and remove finger.
• [FUNC + this Key] refers to one time press [FUNC] key and then pressing this key while FUNC appears
on the display.
• [Press and hold] refers to press key and hold it. Hold timing is adjustable in set mode; however factory
default is 2 sec.
To confirm a parameter, [press any keys other than these keys] or [press microphone`s PTT switch] are
mentioned in this instruction manual. Quickest way to confirm parameters is pressing microphone’s PTT
switch.
)URQW3DQHO
U
③
⑤
⑦
⑯
⑨⑫⑮⑭⑬⑪⑧
④
②
⑥
①
⑩
 Primary Functions
No. Key Function
A
Power Key
Turns the power on/off. (P.19)
B
Left band [VOL] knob Rotate to adjust audio sound level on the left band. (P.19)
C
Right band [VOL] knob Rotate to adjust audio sound level on the right band. (P.19)
D
Left band TX/RX indicator Indicates transmission (Red) or reception (Green) on the left band.
E
Right band TX/RX indicator Indicates transmission (Red) or reception (Green) on the right band.
F
Left band [SQL] knob Rotate to adjust squelch level on the left band. (P.20)
G
Right band [SQL] knob Rotate to adjust squelch level on the right band. (P.20)
H
Left band dial
Rotate to select frequency, memory channel and various settings on the left
band.
I
Right band dial
Rotate to select frequency, memory channel and various settings on the right
band.
J
[FUNC] key Sets functions.
K
Left band [V/M] key Switches between VFO mode and memory mode on the left band.
L
Right band [V/M] key Switches between VFO mode and memory mode on the right band.
M
[MW] key Press to select dual Memory mode.
N
 key
Programmable function key.(P.63)
O
[H/L] key Press to select Hi/Mid and Low output power. (P.33)
P
Microphone connector For connecting microphone.