User's Manual
Table Of Contents
- Before operating the transceiver
- Attention
- _
- New and Innovative Features
- Standard Accessories
- _
- For a base station set up
- For a mobile station set up
- Location
- _
- Installing a Mobile Antenna
- Installing the Transceiver
- Front Panel
- External power control function
- Power supply voltage display function
- Part Names and Functions
- Front Panel
- Rear Panel
- Display
- Microphone EMS-53 (Standard)
- _
- Turning the unit on and off
- Switching the MAIN band
- Audio Volume level setting
- Changing frequency by channel step
- Changing frequency by 1 MHz step
- Setting the channel step
- Shift Direction and Offset frequency setting
- Memory Mode
- Recalling a memory channel
- Memory channel deleting
- Programmable data in the memory channel
- Channel name (Alphanumeric) registration function
- CALL mode
- To recall a CALL channel
- To receive signals
- Monitor function
- Reverse function
- To transmit
- Selecting transmission power
54
Special Functions
TNC Clone
This feature enables setting changes required for APRS function without connecting to a PC.
Please use this feature when a setting change is desired while the APRS function is in operation.
Setting changes are available for the call sign of your station, communication speed and data trans-
mission time separation (Setting is made in setting mode).
1. Press the FUNC key and then press the H/L
key while [F] icon is on (Enter packet mode).
2.
Press the CALL key with the FUNC key pressed.
The display will show [TNCLON] and data pro-
grammed in setting mode for the call sign of
your station, the communication speed and data
transmission time separation are transmitted.
3. Upon completion of data transmission, the dis-
play shows [PASS].
Turning the unit off will make it exit the clone
mode and restore normal packet operation.
Data is under transmission
Completion of data transmission
TNC
TNC
TNC