User's Manual
Table Of Contents
- Before operating the transceiver
- Attention
- _
- New and Innovative Features
- Standard Accessories
- _
- For a base station set up
- For a mobile station set up
- Location
- _
- Installing a Mobile Antenna
- Installing the Transceiver
- Front Panel
- External power control function
- Power supply voltage display function
- Part Names and Functions
- Front Panel
- Rear Panel
- Display
- Microphone EMS-53 (Standard)
- _
- Turning the unit on and off
- Switching the MAIN band
- Audio Volume level setting
- Changing frequency by channel step
- Changing frequency by 1 MHz step
- Setting the channel step
- Shift Direction and Offset frequency setting
- Memory Mode
- Recalling a memory channel
- Memory channel deleting
- Programmable data in the memory channel
- Channel name (Alphanumeric) registration function
- CALL mode
- To recall a CALL channel
- To receive signals
- Monitor function
- Reverse function
- To transmit
- Selecting transmission power
44
Selective Communication
Digital voice communication (DR-635T only)
By installing an optional digital unit EJ-47U, digital voice
communication becomes possible.
1. Install EJ-47U to the connecter CN3 of the unit.
2. Press the FUNC key, and then press the SQL
key while the [F] icon is displayed.
[
] is shown on the display.
3. Press the FUNC key or the PTT key to enter
the digital communication mode. Repeat step
2 to exit and return to the analog FM mode.
4. To cancel the digital communication mode,
press the SQL key while the display shows
codes in step 2.
IMPORTANT: When activating this setting, a code is displayed and switched by rotating the
dial, but it does not affect the function of EJ-47U. Please disregard this setting
sequence. Digital voice operation on certain amateur radio frequencies may
be prohibited, restricted or subject to a special station license. Please be sure
to consult with your local authority prior to operating in this mode.
When digital setting is made