User's Manual
Table Of Contents
- Before operating the transceiver
- Attention
- _
- New and Innovative Features
- Standard Accessories
- _
- For a base station set up
- For a mobile station set up
- Location
- _
- Installing a Mobile Antenna
- Installing the Transceiver
- Front Panel
- External power control function
- Power supply voltage display function
- Part Names and Functions
- Front Panel
- Rear Panel
- Display
- Microphone EMS-53 (Standard)
- _
- Turning the unit on and off
- Switching the MAIN band
- Audio Volume level setting
- Changing frequency by channel step
- Changing frequency by 1 MHz step
- Setting the channel step
- Shift Direction and Offset frequency setting
- Memory Mode
- Recalling a memory channel
- Memory channel deleting
- Programmable data in the memory channel
- Channel name (Alphanumeric) registration function
- CALL mode
- To recall a CALL channel
- To receive signals
- Monitor function
- Reverse function
- To transmit
- Selecting transmission power
26
Parameter Setting Mode
NOTE: The Alphanumeric Channel Tag setting will not appear in the menu until memories have been programmed
first!
A list of the setting mode Parameters
Cut and keep the following list of the setting mode parameters for your convenience.
IMPORTANT: Please read the following pages thoroughly prior to changing any parameters.
THE PARAMETERS CANNOT BE SET WITHOUT ENTERING THE SET MODE.
By entering the Parameter Setting mode, some of the radio’s operating parameters can be changed
to suit your application. The following is the Selectable Parameters’ Menu.
Press the FUNC key /UP key
Press the SQL/DOWN key
Default display
Function
STEP 20
Channel Step setting
TIMER
Scan type switching
BEEP 2
Beep sound ON/OFF
TOT OFF
Time-Out-Timer ON/OFF
TOTP OFF
TOT penalty ON/OFF
APO OFF
Auto-Power-Off ON/OFF
ALERT
Tone Burst frequency setting*
CKSFT OFF
Clock Shift setting
BELL OFF
Bell function setting
BCLO OFF
Busy-Channel-Lock-Out setting
SCR OFF
Theft Alarm ON/OFF
TX-COL 3 TX display color
RX-COL 3 RX display color
SB-COL 3 Stand -By display color
LAMP 4
Dimmer setting
C
Call sign setting (packet)
HB 1200
Transmission speed setting (packet)
BCON 0
Beacon interval setting (packet)
Parameter Setting Mode
*DR-635E has TB1750 Tone burst frequency as the default.