User's Manual

CHAPTER 6 READER-HOST PROTOCOL
NANOSCANNER READER USER GUIDE • DOC # 8101029-000 REV A 80
© 2003 Alien Technology™
.
Example
Command
Response
>Get AutoModeStatus
> AutoModeStatus =0 //Auto Mode is off
Command
Response
> Get AutoModeStatus
> AutoModeStatus =30 * //Auto is starting its AutoAction
but the asterisk also indicates that a complete auto mode cycle
has completed since we last enquired.
A
UTOMODERESET
The AutoModeReset command will reset all auto mode parameters to their
default values, including setting the auto mode to off.
NOTE: Changes made with this command will take effect immediately.
Example
Command
Response
>AutoModeReset
> All AutoMode settings have been reset !
A
UTOMODETRIGGERNOW
The AutoModeTriggerNow command will emulate an external IO trigger event to
effect auto mode. This command will only work if the Nanoscanner is already in
auto mode and is waiting for a start trigger condition. At this point, issuing the
AutoModeTriggerNow command will be identical to a real external trigger event,
forcing the auto mode into its action cycle.
NOTE: Changes made with this command will take effect immediately.
Example
Command
Response
>AutoModeTriggerNow
> Auto Mode Triggering Now