Instruction manual

8
Starting Winbox Using IP Address
1. If your PC is setup on the same subnet as the default AP24/AP58 IP address 192.168.0.239 then
you must use the IP address to login. Using a MAC address will not work.
2. To log in to the WinBox enter the IP address 192.168.0.239 in the Connect To field
3. Click on the connect button to log
in.
4. Used admin as login name and
leave the password blank.
5. You can change this as you wish or
add your own to the list if these do
not conflict with your network.
6. When using the IP address to login
make sure you only have one
interface enabled on your PC
which is the one being used to
connect to the AP24/AP58.
Try out the different buttons on the left to see all the available options;
• Ether1 and wlan1 are the ports that are active for the AP24/AP58.
• Ether2, ether3 and serial ports are not used on the AP24/AP58 even though they appear on some
of the menus.