User Manual

11. Exit: Press this button to cancel your selection or to exit a submenu.

12. Dial: Turn this dial to adjust the setting of the currently selected item in the display

(number values, kits, songs, etc.). Alternatively, use the Left () and Right () buttons.

13. Click: Press this button to activate or deactivate the built-in metronome (“click”). When

you activate it, the Metronome settings will also appear in the display, which you can

adjust. See Operation > Metronome to learn more.

14. Song: Press this button to access the Song Selection page in the display. See Operation

> Songs to learn more.

15. Kit: Press this button to access the Kit Selection page in the display. See Operation >

Kits to learn more.

16. Save: Press this button to save the settings of the current kit. See Operation > Kits to

learn more.

17. Tempo: Press this button to view the current tempo in the display. See Operation >

Metronome to learn more.

18. Record: Press this button to record-arm the drum module. To start recording, hit a drum

pad, press Enter, or press Start/Stop. To cancel recording, press Exit or Record. See

Operation > Songs to learn more.

19. Start/

Stop: Press this button to play or stop a song. When the drum module is record-

armed, press this button to start recording.

20. Left (): Press this button to decrease the value of the selected item (or move to the

previous setting) in the display. Alternatively, turn the dial.

21. Right (): Press this button to increase the value of the selected item (or move to the next

setting) in the display. Alternatively, turn the dial.

Rear Panel

1. Phones Output: Connect 1/8” (3.5 mm)

stereo headphones (sold separately) to this

output. Control the volume by turning the

Phones Volume knob on the top panel.

2. Aux Input: Connect an additional audio player

(smartphone, tablet, etc.) to this input using a

standard 1/8” (3.5 mm) stereo/TRS cable. The

sound will be mixed with the drum module’s

sounds.

3. Outputs: Connect your audio interface, mixer, powered monitors, etc. to these outputs

using standard 1/4” (6.35 mm) TRS cables.

4. Crash 2 Trigger Input: Connect the included Crash 2 cymbal pad to this input using a

standard 1/4” (6.35 mm) TRS cable.

5. Tom 4 Trigger Input: Connect an optional single- or dual-zone drum pad to this input

using a standard 1/4” (6.35 mm) TS or TRS cable, respectively.

6. MIDI In: Connect an external MIDI device (sequencer, drum machine, etc.) to this input

using a standard 5-pin MIDI cable.

7. MIDI Out: Connect an external MIDI device (synthesizer, sound module, etc.) to this

output using a standard 5-pin MIDI cable.

8. USB MIDI Port: Connect this USB port to a computer using a standard USB cable. The

drum module will send MIDI messages to your computer over this connection.