Assembly Instruction

This Page lists all the contents included

in the box

Please take the time to

identify the hardware as

well as the individual components to this

product

As you unpack and prepare for

assembly, place

the contents on a carpeted or padded

area to protect them from damage

8PCS

SPRING WASHER

FLAT WASHER

MS x 2mm

PCS

=@[]

PC 4 PCS

ASSEMBLY INSTRUCTION

PAGE 1
ASSEMBLY INSTRUCTION q; 1 PC IJ SPRING WASHER MS =@[] ~ 4 PCS (I 1 PC 8 PCS FLAT WASHER MS x 2mm ~ 8PCS 8PCS This Page lists all the contents included in the box . Please take the time to identify the hardware as well as the individual components to this product . As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage .
PAGE 2
O Place table top(A) upside down on soft surface. Align and fasten all legs(B) to table top(A) using bolt(D), spring washer(E) and flat washer(F) and tighten with Allen wrench(C). ***Do not fully tighten the nut or bolt until all nuts and bolts are attached. F I o )_ 0 // // \ c \ / r=io-..c:-;r-- - - - I -, / --""'-.. »> / IPA Flip table over using two people to lift and flip the table. Unlock the latches underneath table top(A).
PAGE 3
II Push both ends together and make sure pin line up. Close the table top(A) tightly and lock all latches on the underneath of the table. A Cleaning & Care Treat Surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surface with a dry or damp soft cloth. Do not use abrasive cleaners . Hardware may loosen over time. Periodically check that all connections are tight.