Operation Manual

Example DOS bo
x
9 Maintenance - Speed Touch ToDefaults
75 / 104
3EC 17058 AAAA TCZZA Ed. 04
8. After the STHome finished its POST, it will configure the IP
address <STHome IP address> you are pinging.
9. You must
clear the entry in the ARP cache by issuing
the following command:
arp –d <STHome IP address>
10. Verify connectivity by pinging the STHome a second time:
ping <STHome IP address>
The STHome should reply.
11. Browse to the STHome pages and click
to make
the new IP address permanent.
In the following figure all the steps are shown as an example of
setting STHome's IP address to 10.0.0.145 from a PC with an MS
Windows OS: