User manual

72 73
• SIM management\Roaming.
• Mark/Unmark the Data roaming checkbox to activate or deactivate
data roaming.
• When Data roaming is deactivated, you can still perform data exchange
with a Wi-Fi connection (refer to “6.1.2 Wi-Fi”).
To limit your data connection to 2G networks only
To save battery and extend battery life, you can set to activate 2G
networks (GPRS or EDGE) only.
• Drag down notification panel and touch
to access Settings.
• Touch More...\Mobile networks\3G service.
• Mark Off in Enable 3G service.
6.1.2 Wi-Fi
Using Wi-Fi, you can connect to the Internet when your phone is within
range of a wireless network. Wi-Fi can be used on your phone even
without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
• Drag down notification panel and touch
to access Settings.
• Touch the switch
beside Wi-Fi to turn on/off Wi-Fi.
• Touch Wi-Fi, the detailed information of detected Wi-Fi networks is
displayed in the Wi-Fi networks section.
• Touch a Wi-Fi network to connect. If the network you selected is
secured, you are required to enter a password or other credentials (you
may contact your network operator for details). When finished, touch
Connect.
6
Getting connected ................
To connect to the internet with this phone, you can use GPRS/EDGE/3G
networks or Wi-Fi, whichever is most convenient.
6.1 Connecting to the Internet
6.1.1 GPRS/EDGE/3G
The first time you turn on your phone with SIM card inserted, it will
automatically configure network service: GPRS, EDGE or 3G. If the
network is not connected, you can press and hold
on notification panel.
To check the network connection you are using, drag down notification
panel and touch
to access Settings, then touch More...\Mobile
networks\Access Point Names or Network operators.
To create a new access point
A new GPRS/EDGE/3G network connection can be added to your phone
with the following steps:
• Drag down notification panel and touch
to access Settings.
• Touch More...\Mobile networks\Access Point Names
• Then touch Menu icon
again and touch New APN.
• Enter the required APN information.
• When finished, touch Menu icon
and touch Save.
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service.
• Drag down notification panel and touch
to access Settings.