User Guide

page -156 OmniSwitch Troubleshooting Guide September 2005
debug chassis auto-reboot ni
Enables and disables Network Interface (NI) module auto-reboots after a fatal error.
debug chassis auto-reboot ni {enable | disable}
Syntax Definitions
enable Enables NI auto-reboots after a fatal error.
disable Disables NI auto-reboots after a fatal error.
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
N/A
Examples
-> debug chassis auto-reboot ni enable
Release History
Release 5.1; command was introduced.
Related Commands
N/A