User's Manual

Indoor applications
This equipment is intended for installation in restricted access locations where access is
controlled
or
where
access
can
only
be gained by service personnel with a key or tool.
Access to this equipment is restricted to qualified service personnel only.
Antenna exposure
Antenna installations for the 9412 eNodeB shall be performed in accordance with all
applicable manufacturer’s recommendations, and national laws
and regulations. To
ensure correct antenna installation, the antenna installer shall perform all necessary
calculations and/or field measurements to evaluate compliance with applicable national
laws or regulations regarding exposure to electromagnetic fields. The supplier of radio
equipment, the supplier of antenna equipment and the integrator and builder of the site
must provide sufficient information so that the limits of the exclusion zones can be
determined. Any changes to the antenna or other equipment in the transmit path may
require re-evaluation of the exposures to electromagnetic fields.
Pursuant to 47 CFR Part 1, Subpart I, subject to the provisions of section 1.1307, all
installations must be evaluated for requirements contained in Table 1, “Limits for
maximum permissible exposure,” in section 1.1310.
Packaging collection and recovery requirements
Countries, states, localities, or other jurisdictions may require that systems be
established for the return and/or collection
of packaging waste from the consumer, or
other end user, or from the waste stream. Additionally, reuse, recovery, and/or recycling
targets for the return and/or collection of the packaging waste may be established.
For more information regarding collection and recovery of packaging and packaging
waste within specific jurisdictions, please contact the Alcatel-Lucent Services -
Environmental Health and Safety organization. For installations not performed by
Alcatel-Lucent Technologies, please contact the Alcatel-Lucent Customer Support
Center at:
Technical Support Services, within the United States: [phone], prompt 2
Product conformance statements Page - 14
United States
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
A-14
Alcatel-Lucent – Confidential
Solely for authorized persons having a need to know
Proprietary – Use pursuant to Company instruction
401-703-614
Issue 1-DRAFT3 April 2009
D
RAFT
D
RAFT