Installation Guide

4/12/17 1 of 2 Coat Hooks

Step 1

Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when

first assembling this product.

Coat Hooks

Thank you for purchasing our Coat Hooks. Assembly of this product requires a screwdriver. We

have found it helpful to have a second person present in at least one step of the assembly.

Coat Hooks Assembly Instructions

Lay out all parts on a "non-abrasive" surface to avoid scratching furniture.

PARTS

PAGE 1
Coat Hooks Thank you for purchasing our Coat Hooks. Assembly of this product requires a screwdriver. We have found it helpful to have a second person present in at least one step of the assembly. Coat Hooks Assembly Instructions Lay out all parts on a "non-abrasive" surface to avoid scratching furniture. PARTS Step 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product.
PAGE 2
Step 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non abrasive surface (like the carton or carpet) to prevent damage to the finish. Note the French Cleat (B) is pre-installed on the back of the Hook Plate (A) with 2 of the Wood Screws (C). Step 3 Remove the French Cleat (B) from the back of the Hook Plate (A) by unscrewing 2 of the pre-installed Wood Screws (C) on the top of the Hook Plate (B). Locate studs behind drywall in desired location.