Installation Guide

Alaterre Furniture

Bathroom 20x36" Wall Storage

Thank you for purchasing the Bathroom 20x36" Wall Storage from ALATERRE FURNITURE. We have

found it helpful to have a second person present during the assembly process.

10/18/2018 1 of 3 20x36" Wall Storage

NO. DRAWING DESCRIPTION QTY

METAL FRAME

SHELF

NO. DRAWING DESCRIPTION QTY

M6x35MM BOLT

ALLEN KEY

4x60MM SCREW

Wall Storage Assembly Instructions

Parts

DRYWALL EZ

ANCHOR

PAGE 1
Alaterre Furniture Bathroom 20x36" Wall Storage Thank you for purchasing the Bathroom 20x36" Wall Storage from ALATERRE FURNITURE. We have found it helpful to have a second person present during the assembly process. Wall Storage Assembly Instructions Parts NO. A B 10/18/2018 DRAWING DESCRIPTION QTY METAL FRAME 2 SHELF NO.
PAGE 2
Step 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when assembling this product. Step 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non abrasive surface to prevent damage to the finish Step 3 Lay Metal Frame Assembly (A) on a non abrasive surface. Attach Shelf (B) to Metal Frame (A) using 16-M6x35MM Hex Bolts (C).
PAGE 3
Step 4 Position Wall Storage in desired location. Mark holes where metal frame will be attach to wall. If possible, attach the Wall Storage to a stud (when possible) behind drywall using 6-4x60MM Wood Screws (D). NOTE: If hole locations do not align with stud, install the Drywall EZ Anchors (F). Tap the EZ Anchor into the drywall up to the thread. Using a Phillips head screw driver, secure the EZ Anchor in the drywall at the desired locations.