Owner's manual

LASER/INK JET COMPATIBLE INSERTS

For Label Holder Item #29301

INSTRUCTIONS

USING YOUR WORD PROCESSING SOFTWARE:

1. CREATE A CUSTOM LABELS TEMPLATE:

• Select Tools from your Toolbar

• From the drop down window select Envelopes & Labels

• On the Labels Tab;

• Click the Options button

• In the box labeled Label Products: Choose "Other"

• Click on the New Label button

2. SETTINGS:

• In the box labeled Label Name: Enter a name for your New Labels

(i.e. Our Product #29301)

• Top Margin: 1.06"

• Side Margin: 1.25"

• Label Height: 0.88"

• Vertical Pitch: 0.88”

• Label Width: 2.9375”

• Horizontal Pitch: 2.9375"

• Number Across: 2

• Number Down: 10

• Set Page Size: Letter, 8-1/2" x 11"

• CLICK OK

You now have a custom template saved for your "New" Akro-Mils Label Holder Inserts. You can create a full page of the same

label, single labels, or mail merges. To use this template at another time: Click on Tools, Envelopes & Labels, Label Products,

Select "Other" then click on the Product # (This is the Label Name you just created i.e. 29301).

NOTE: Labels to be inserted into Holder with the beaded side at the top to ensure proper fit when installed.

1293 South Main St.• Akron, OH 44301

1-800-253-2467 • www.akro-mils.com

Inserts for

FITS BIN SIZES

QTY.

Item #

29301

30210, 30220, 30224,

& all ShelfMax sizes