Installation Guide

General Installation
Steps given are for general installation only. If you require assis-
tance, please contact a plumber.
1. Take the included mounting bracket and mark the location of
the screw holes.
2. Use a drill to prepare the floor for mounting.
3. Secure the mounting bracket to the floor with the included
screws.
4. Use Teflon tape for the hot and cold water lines
5. Connect your water lines.
6. Check for leaks.
Sub Floor Installation
Depending on your home, subfloor installation is possible. Installa-
tion is the same as the steps given in the general installation. The
mounting bracket will be secured directly to the subfloor.
Tub Filler Installation