Operation Manual

1
2
3
4
.-
‘3U
)
\\
:..__________.__—- ——-
-.1’
/
Set a new DSP SURROUND sound with DELAY,
EFFECT, and MULTI JOG.
See “SETTING A NEW DSP SURROUND SOUND
MANUALLY.
Within 4 seconds, press ENTER.
“MI” flashes on the display.
If this step is not completed within 4 seconds, press
SURROUND firstto display “DSP ON”. Then press ENTER
within 4
seconds.
Within 4 seconds, turn MULTI JOG to select one
of the manual modes Ml - M4.
Within 4 seconds, press ENTER.
The new DSP SURROUND sound is memorized.
To select the stored DSP SURROUND sound
Press SURROUND, and turn MULTI JOG to select one of the
manual modes Ml - M4 within 4 seconds,
To adjust the volume of the surround speakers
Press MANUAL SELECT twice or three times on the remote
control,
“S-L” or “S-R” is displayed for 2 seconds. Press M
DOWN or
FM UP on the remote control within these 2
seconds.
The DOLBY PRO LOGIC (page 21) and the DOLBY DIGITAL
SURROUND (page 28) surround speakers level is also
changed.
MONO
1 Press TUNER BAND repeatedly to select the
desired band.
~FM— AM—l
2
When TUNER BAND is pressed while the power is off, the
power is turned on directly.
Press ++ DOWN or * UP to select a station.
Each time the button is pressed, the frequency changes.
When a station is received, “TUNE is displayed for 2 seconds.
During FM stereo reception, (l(m)]) is displayed.
([KEN))
TUNE
To search for a station quickly (Auto Search)
Keep + DOWN or - UP
pressed until the frequency starts
to change rapidly. After tuning in to a station, the search stops.
To stop the Auto Search manually, press -
DOWN or ~
UP.
The Auto Search may not stop at stations with very weak
signals.
When an FM TUNER stereo broadcast contains noise
Press MONO TUNER on the remote control so that “MONO”
appears on the display.
Noise is reduced, although reception is monaural.
To restore stereo reception, press MONO so that ‘(MONO”
disappears.
The SURROUND mode is canceled when:
- the ECHO level is changed.
- the DOLBY PRO LOGIC is turned on.
- the headphones are plugged in.
- the 5.1 CH (page 28) is selected.
1I ENGLISH