Operation Manual

To connect other optional equipment
→
page 21.
PREPARATIONS (cont.) pg. 5
REMOTE CONTROL
Inserting batteries
Detach the battery cover on the rear of the remote control and insert two R6 (size AA) batteries.
When to replace the batteries
The maximum operational distance between the remote control and the sensor on the main unit should be
approximately 5 meters(16 feet). When this distance decreases, replace the batteries with new ones.
To use the SHIFT button on the remote control
Buttons 1 have different functions. One of these functions is indicated on the button, and the other on the plate
above the button.
To use the function on the button, simply press the button.
To use the function on the plate above the button, press the button while pressing the SHIFT button.
To use the FUNCTION button on the remote
The FUNCTION button substitutes for the function buttons (TAPE/DECK 1/2, TUNER, VIDEO/AUX, MD,CD) on
the main unit. Each time the FUNCTION button is pressed, the next function is selected cyclically. When tapes are
inserted in both decks, both decks are selected with the FUNCTION buttons.
The / PRESET button on the remote control
The function is the same as that of the DIRECTION/PRESET button on the main unit.
NOTE
• If the unit is not going to be used for an extended period of time, remove the batteries to prevent possible
electrolyte leakage.
• The remote control may not operate correctly when: