ASSEMBLY INSTRUCTIONS TWIN BUNK BED Be sure to check all packing materials carefully for small parts which may have come loose identify and count all parts and hardware. Compare with the parts list to be sure all parts are present. “DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED” SIZE OF MATTRESS AND FOUNDATION (SUPPORT) This bed is designed to use a twin mattress and junkie board The total thickness must not exceed 8’ inches. Do not use mattress without the proper junkie board of safe foundation.
0 [r— (Nat Included) PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY 2 IMPORTANT: 2.
Part List—WF282787 1 2 vv 5 Horizontal board 4pc Left front bed column 1pe 3 4 FE Left rear bed column 1pc Right rear bed column 1pc Com——— Right front bed column 1pc Support timber -2pc 7 8 | Rear guard rail 2pc Bed side plate 1pc Bed side plate 1pc Bed side plate 1pc Bed side plate 1pc Front guard tall 2pc
[Home TIT VANE em ANY AD 7 ” the bottom Install PCs on the top PCs on No.
