User's Manual

AW 96 Series System Installation Manual
___________________________________________________________________________
AirWalk Proprietary and Confidential Page 34 of 72 6/14/2006
6.3 Ethernet Cable Wiring
Connect Integrated Omni RU to AW-96 using supplied Ethernet cable as shown in Figure
6-4 (1). Connect external Ethernet connections to the BTS and BSC Ethernet ports on
the AW-96 (2).
Figure 6-4 Ethernet Cable Wiring
6.4 GPS Antenna Cable Wiring
Connect the external GPS antenna RF cable to the GPS antenna port on the AW-96 unit
as shown in Figure 7-5. The GPS connector is an “TNC” connector. The AirWalk GPS
antenna kit (AWANC001GPCA01) includes a GPS antenna, mounting hardware and a
25m cable (RG-58 or better).
Note the GPS antenna must located outside in a position to see the general sky. The
GPS antenna must see at least 4 GPS satellites in the sky to receive enough time
information for proper system operation.
GPSANT
RF RXB(a ) RF RXA(a)
RF TX
(a)
RF RXB( b) RF RXA(b )
RF TX
(b)
RF RXB(r ) RF RXA( r) RF TX (r )
T_EVEN
T_10MHz
RU IF BSC IF
ENV IF BTS IF
RF RX_ A OUT
RJ- 4 5
RX_A TP
TX/ RX_A ANT
TX_TP
RF TX I N
RF RX_ B OU T
RX_ B ANT
RX_B TP
1
2
GPSANT
RF RXB(a ) RF RXA(a)
RF TX
(a)
RF RXB( b) RF RXA(b )
RF TX
(b)
RF RXB(r ) RF RXA( r) RF TX (r )
T_EVEN
T_10MHz
RU IF BSC IF
ENV IF BTS IF
RF RX_ A OUT
RJ- 4 5
RX_A TP
TX/ RX_A ANT
TX_TP
RF TX I N
RF RX_ B OU T
RX_ B ANT
RX_B TP
1
2