User's Manual

2-13
2.8. Bridge Mode
Networking  Bridge/NAT Mode
Bridge mode is enabled by simply selecting “Bridge Mode” as shown in Figure
2-13. By selecting “Static” IP type, users can manually assign the “IP address” and
“netmask”. The “IP address” and “netmask” can also be automatically assigned by
the DHCP server by selecting “DHCP” IP type. After setting the configurations of
these fields, press the “Apply” button to write the new configurations into the CPE
and go to “Management  Reboot” as shown in Figure 2-34, to reboot the system in
order for the new configurations to take effect.
Figure 2-13 Bridge Mode