Product Manual

MN166-1 rev A 11/12
27
Materials in direct or indirect contact with the patient
o Concentrator casing …………………..…Valtra/ABS/Polystyrene
o Concentrator Control Panel…………..….Polyester EBG7 or equivalent
o Control Panel Door ……………………….Polycarbonate
o Concentrator Handle .…………………… Polycarbonate
o Gas Outlet, Nozzle …………………..……Polycarbonate
o Air intake filter ……………………………..Foam, Polyester
o Unit Label …………………………..…….. Lexan
o Unit feet ……………………………………Polyurethane
o Cord connectors ……………………..…...Polycarbonate/Vinyl chloride
o Power Cord(s)……………………………..PVC, Metal
o Power Supply…………………………..…..Lexan 940(Polycarbonite)
o Concentrator carrying case………............100% Polyester microfiber w/ PVC backing
o Battery carrying case, Belt and Strap……100% Polyester microfiber w/ PVC backing
o Carry cart …………………………………..Polypropylene plastic, steel & aluminum
o Packaging ………………………………….Double reinforced corrugated cardboard
Reserve Oxygen Supply
Your Equipment Provider may recommend another source of supplemental oxygen therapy in case there is a mechanical
failure or a power outage.
Troubleshooting
The FreeStyle 5 product is designed for years of trouble-free use.
If your FreeStyle 5 Portable Oxygen Concentrator fails to operate properly, refer to the chart on the following pages for possible
causes and solutions and, if needed, consult your Equipment Provider.
Do not attempt any maintenance other than the possible solutions listed within this manual.