USE & CARE INSTRUCTIONS Air Purifier CF-8126AS 1
READ AND SAVE THESE INSTRUCTIONS WARNINGS Failure to comply with the warnings listed below may result in electric shock or serious injury. This product should be used only in accordance with the specifications outlined in this manual. Usage other than what has been specified here may result in serious injury.
• DO NOT run cord under carpeting. • DO NOT cover cord with throw rugs, runners, or similar coverings. • DO NOT route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Send to Customer Service for assistance. • Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fie, electric shock or injury to persons. • DO NOT use outdoors. • DO NOT place anything on top of unit.
PRODUCT STRUCTURE UV la Air quality indicator Main unit 5
Touch panel Pre-filter HEPA filter Activated carbon filter Base Lock 6
AIR CLEANING SYSTEM Improve your indoor air quality with your new Air Cleaning System. Multiple levels of cleaning include a combination of Pre-filter that traps big particals, HEPA filter that captures micro particles UV-C light technology enhances germ-killing. PRE-FILTER: Captures initial dust and allergen particles. HEPA FILTER: Captures dust, smoke, pollen and other allergens; Activated Carbon Filter: Removes odors and bad smells. OPERATING INSTRUCTIONS BEFORE OPERATING THE AIR PURIFIER: 1.
3. Plug the power cord into a right voltage AC outlet. IMPORTANT: When moving the air purifier, always lift unit firmly by your hands. OPERATING THE AIR PURIFIER 1. POWER/FILTER RESET Soft press to turn on/ off the unit. Note: Press and hold POWER Button for 5 seconds to reset Filter Replace Indicator. 2. “TIMER” BUTTON: By pressing this button, the purifier can be timed to operate for intervals of 2, 4 and 8 hours, stopping automatically when the selected operating time has elapsed. 3.
quality level. Under SLEEP mode, all the lights will turn off and unit working in speed 1. 4. “SPEED” BUTTON: There are 4 speed setting. Press the button each time to select L(I),M(II),H(III) and Turbo speed. Speed I is sleep mode, select this speed and in 10s, all LED will be turned off. 5. “UV/ION/WIFI” BUTTON: Press this button to turn on/off the UV and Ionizer function. Note: Press the hold this button for 5 seconds to active the WIFI connection.
FILTER REPLACE INDICATOR The FILTER RESET led light on indicates that it is time to replace the filter. Follow the instruction below to change filter and reset the program. *Combination Filter will last approximately 6 months. 1.Find the lock on the base of the unit. 2.Unock it by moving it to left. 3. Lift up the unit. 4. Get the dirty filter out and put a new one into. 5. Set back the unit and move the lock to right. 6. Press Power button for 3-5 seconds to reset the firmware.
The machine should be cleaned at least once every month by a clean, dry, soft cloth. More frequent cleaning may be required depending on environmental conditions. NOTE: Do NOT stick any foreign objects or your fingers inside of the unit. Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on and/or in the unit while cleaning as they will damage the product. NEVER use alcohol or other solvents.
FILTER FILTER should be cleaned once each month by vacuum cleaner. Note: Filters should be replaced at least once each 6 months. More frequent cleaning and replacing may be required depending on environmental conditions. Warranty: 1 year from the date of purchase FOR ANY WARRANTY CLAIMS, PLEASE RETURN YOUR UNIT OR SEND IT WITH FREIGHT PREPAID TO YOUR DEALER, TOGETHER WITH YOUR PROOF OF PURCHASE. FCC warning: This device complies with part 15 of the FCC Rules.
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
Le présent appareil est conforme aux CNR d'Industrie Canada applic ables aux appareils radio exempts de licence.L'exploitation est autorisée aux deux conditions s uivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.