Submittal Sheet

MADE IN USA
Copyright © 2017 Airex Manufacturing Inc.
Airex Manufacturing, Inc. Reserves the right to make changes or improvements at any time without notice.
AIREX TITAN OUTLET™ - A wall outlet seal by Airex Manufacturing Inc., shall be
provided and installed with its compression gasket mounting method and must be
fastened to wall surface with supplied ICC-ES listed and approved non-corrosive
screws with pre-loaded neoprene washers. Wall Outlet must also integrate an
over-molded, flexible, elastomeric sleeve for sealing, supporting and isolating
refrigerant pipes to also control vibration. The Wall Outlet shall also feature
outdoor-rated durability and shall provide wall expansion and contraction protection
features achieved by gaskets and seals as per energy code requirements. A stainless
steel clamp must be utilized to create a “Mechanical Connection” between wall seal
and pipe insulation protector as intended per energy codes to allow removable/reus-
able maintenance capabilities and designed to co-act with the AIREX E-FLEX
GUARD™ Pipe Insulation Protection Cover. Wall Outlet seal and insulation protector
must both be sustainably and securely installed, mechanically fastened together as
one, due to piping vibration, and shall be assembled without the use of adhesives or
adhesive tapes as per energy code requirements. Wall Outlet shall be tested and
must meet the following testing: ASTM E 331 (Water Penetration), ASTM E 283
(Air Leakage), and ASTM E 2178 - Air Permeance of Building Materials.
TITAN OUTLET
TM
U.S. Patents #9,091,377 B2, #9,523,200 B2
HVAC Pipe Penetration Wall Seal
Product Description and Specification
TITAN OUTLET MODEL NUMBERS
TM
Phone: [phone] Fax: [phone]
72170 Dunham Way, Suite D, Thousand Palms, CA 92276
www.airexmfg.com
3.90"
4.25"
All-Surface
Light-Density
Wall Gasket
(Pre-Loaded)
Wall Mounted Outlet
Flexible
Inlet Sleeve
Stainless Steel
Adjustable Clamp
Anti-Corrosion,
Lubricated,
All-Material,
Tap Screws
Neoprene
Washers
(pre-mounted)
Wall Stud
and/or
Plywood
Exterior
Wall
Surface
7.50"
10.00"
TM
TM
TM
TM
TM
TGS
Model Series
Sleeve Diameters
TSS
Model Series
Sleeve Diameters
2.50"
6.90"
7.25"
TGS-550-G
TGS-575-G
(Fits: 1" wall thickness pipe insulation with 3/4", 7/8" tube
or 3/4" wall thickness pipe insulation with 1-1/8" tube)
TSS-550-G
TSS-575-G
TGS-510-G
5.50"
Model TGS: Stucco, Masonry Applications
Model TSS: Siding, Compact Applications
Airex Part Number
TGS-510-G
3.1875” 3-3/16” 1”
TGS-550-G
TGS-575-G
2.375”
1.70” 1-11/16”
2-3/8”
1/2”
3/4”
Sleeve Diameter
Insulation
Thickness
Airex
Part Number
1/2”
3/4”
Insulation
Thickness
TSS-550-G
TSS-575-G
2.375”
1.70” 1-11/16”
2-3/8”
Sleeve Diameter
Airex
Part Number
Airex Part Number
Wall Mounted Outlet (Rigid Plastic)
• ASTM D1525C-09 - Temperature Deformation Test
• ASTM D648-07 - Temperature Load Deformation Test
• UL 94 HB - Flammability Test
• UL 746C - Outdoor Suitability - f1 Rating
• ASTM E283 - Standard Test Method for Air Leakage
• ASTM E331 - Standard Test Method for Water Penetration of
Exterior Walls by Uniform Static Air Pressure
• ASTM E 2178 - Air Permeance of Building Materials
TITAN OUTLET
TM
Color Options
White - W
Gray - G
Substitute (G)
with (W)
for White
Energy
Efficient
Products
Refrigeration Pipe Penetration Detail
EXTERIOR WALL OR PARAPET
WALL SEAL PENETRATION OUTLET WITH
ELASTOMERIC SLEEVE
INSULATION PROTECTIVE
PVC COVER
ELASTOMERIC LINE-SET
COMPRESSION &
ANTI-VIBRATION SLEEVE
INSULATION FOR
REFRIGERATION
SUCTION LINE
REFRIGERATION
SUCTION LINE
MECHANICAL CONNECTION
SECURED WITH STAINLESS
STEEL CLAMP
REFRIGERATION
LIQUID LINE
COPPER
WALL FASTENERS SELF-TAPPING 3/8" HEX HEAD
1/4" DIAMETER ALL MATERIAL ANCHORS SCREWS
WITH ELASTOMERIC WASHERS
WALL SURFACE SEAL
ELASTOMERIC GASKET
Product Performance Testing
Plastic Material Testing
Approved Material & Performance Testing
Wall Outlet Sleeve (Elastomeric Plastic)
• ASTM D573-04 - Deterioration Test
• ASTM D746-07 - Brittleness Temperature Impact
Project
Contractor
Date
Specification Reference
Comments
SUBMITTAL SHEET
(Fits: 3/4" wall thickness pipe insulation with 5/8", 3/4”, 7/8" tube
or 1/2" wall thickness pipe insulation with 1-1/8" tube)
(Fits: 3/4" wall thickness pipe insulation with 5/8", 3/4”, 7/8" tube
or 1/2" wall thickness pipe insulation with 1-1/8" tube)
(Fits: 1/2" wall thickness pipe insulation with 5/8", 3/4”, 7/8" tube)
(Fits: 1/2" wall thickness pipe insulation with 5/8", 3/4”, 7/8" tube)