Instructions / Assembly

ManualsBrandsAireRyder ManualsKitchenBerkeley 3-Light Aged Walnut Ceiling Fan Light Kit

Fig.1

Motor

Switch Box

White Wire

Ridged Wire

Hex Nut

Screw

Switch Box Cover

Nipple(-b)

Light Kit

Wire Nut

Smooth Wire

Washer

Center Plug

Black(Blue Wire)

1. Adjust the arms of the fixture according to the drawing of the package.

Important:

a. The arms should be positioned with equal distances between them.

b. The arms should be fixed securely.

2. Remove the switch box cover from the switch box of the fan by loosing the three screws.

(See Fig.1 & Fig.2)

3. Unscrew the center plug from the switch box cover and discard it.

4. Thread the wires through the switch box cover, washer and hex nut, then attach nipple(-b)

of the light kit to the hole of the switch box cover and secure it with the washer and hex nut.

5. Pull out the wires from the switch box. Make wire connections using the wire nuts:

---The smooth (marked) wire from the light kit to the black or blue wire from the fan.

---The ridged (unmarked) wire from the light kit to the white wire from the fan.

---Carefully tuck the wires back into the switch box cover.

6. Restore the switch box cover back to the switch box using the three screws.

7. Attach the glass shades upward to the glass holders, then secure them with the socket rings.

(See Fig.3)

8. Install bulbs (not included). See relamping label at socket area or packaging for maximum

allowed wattage.

9. Turn on the power at the main fuse or circuit breaker box.

(You can control the lights with the pull chain)

Fig.3

Switch Box

Arm

For Light Kit:

BE-LKD003 --- Page 1

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. The combined weight of your ceiling fan and light kit cannot exceed 35 pounds unless

additional support is provided for the fan.

BE-LKD003

060612

Fig.2

Motor

Switch Box

White Wire

Ridged Wire

Hex Nut

Screw

Switch Box Cover

Nipple(-b)

Light Kit

Wire Nut

Smooth Wire

Washer

Center Plug

Black(Blue Wire)

Glass Holder

Glass Shade

Socket Ring

Pull Chain

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS BE-LKD003 WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. The combined weight of your ceiling fan and light kit cannot exceed 35 pounds unless additional support is provided for the fan. Fig.1 Black(Blue Wire) Wire Nut Smooth Wire Washer Center Plug Fig.
PAGE 2
For Chandelier: Outlet Box House Grounding Wire Wire Nut Hex Nut Washer Mounting Strap Green Grounding Screw Mounting Screw Nipple(-a) 1. Attach nipple(-a) to the mounting strap, then secure it with a washer and hex nut. 2. Attach the mounting strap to the outlet box by using two mounting screws. 3. Take out the parts from the hardware package for the Canopy chandelier. Top Loop 4. Follow the step 1 as For Light Kit. (Page 1) Collar 5. Secure the loop to nipple(-b). Loop Lock 6.