Operation Manual

Menu functions
98
select Alias for access point. To change the Access Point Name
(APN), select Access point. Contact your network operator or
service provider for the APN.
Security settings
Select Menu → Settings → Security settings, and select one of the
following:
• Phone code request — to set the radio to ask for your phone code
every time the radio is switched on.
If you enter an incorrect phone code five times in succession, the
code is blocked, and you must enter the security code to unblock
the phone code.
• Configure access levels — to change what kind of access rights
are required for certain functions. You must enter the
configuration code for this function.
• Access level — to change your access level (Extended or Normal),
which determines what kind of access rights you have. You must
enter the access level code for this function. If the Access level is
set to Extended, switching the radio off returns the level to
Normal.
• Change of access codes — to change the phone code or the
security code. See Access codes on page 14.
You should avoid using access codes similar to the emergency
numbers, such as 112, to prevent accidental dialling of the
emergency number.
Display settings
Select Menu → Settings → Display settings, and select one of the
following:
• Wallpaper — to set your radio to display a background image,
known as a wallpaper, when the radio is in the idle mode. Your
THR880i_Rel6_en_print.book Page 98 Jeudi, 20. novembre 2008 2:13 14