Operation Manual

Menu functions
96
Direct mode settings
Select Menu → Settings → Direct mode settings, and select one of the
following:
• Direct mode scanning — to activate or deactivate direct mode
scanning. Direct mode scanning allows you to receive calls made
to the other groups on the same channel.
• View active direct mode device — to view the type and address of
the active direct mode device (repeater, gateway, or none).
Keyguard settings
Select Menu → Settings → Keyguard settings, and select one of the
following:
• Automatic keyguard — to set the desired level of keyguard
(Keypad or All keys) to be activated automatically after the
desired time. Select Off to switch the automatic keyguard off. See
Lock the keys (Keyguard) on page 21 for more information about
the two levels of keyguard.
• Keyguard code — to set the radio to ask for the phone code when
you unlock the keypad. If you enter an incorrect phone code five
times in succession, the radio asks for the security code.
Communication settings
Select Menu → Settings → Communication settings, and select one
of the following:
• Listen to voice messages — to listen to voice messages. The voice
mailbox is a network service; it may not be available in all
networks or you may need to subscribe to it first.
Tip: To quickly call your voice mailbox, press and hold
in the idle mode.
• Voice mailbox number — to store or edit your voice mailbox
number. Enter the voice mailbox number you have received from
your service provider, and press
OK .
THR880i_Rel6_en_print.book Page 96 Jeudi, 20. novembre 2008 2:13 14