Operation Manual

Positioning
70
Set units of measurement
To select which units are used to display position information, select
Set units of measurement. You can select the unit separately for
Accuracy, Speed, and Altitude.
Display position info in idle mode
To select whether position information is displayed in idle mode,
select Display position info in idle mode
→ On or Off. As default, the
currently selected option is highlighted. The initial default is Off.
Waypoint idle off
To remove waypoint information from the idle mode display, select
Waypoint idle off.
THR880i_Rel6_en_print.book Page 70 Jeudi, 20. novembre 2008 2:13 14