Quick Start Guide

21
Adding a New Station
Getting Started
Step 1: Opening the "Add New Station" Window
There are several ways to add a new station in Support Tool. The following method is done by returning to
the System Conguration page.
To add a new station to an existing system, the existing program le is needed as well as network
connection to all existing stations. Ensure the new station is connected to the network and has
completed its initial boot up before starting step one.
From the menu bar, select Tools(T) followed
by System Conguration.
1.1 - System Conguration
Click
Add New Station
to open the
Add New Station Window.
1.2 - Add New Station
Step 2: Adding a New Station
New stations can be added in batches by station type.
Use the Station Type drop down
menu to select the correct station
type for the new station.
2.1 - Station Type
Enter the number of stations that are
being added to the system.
2.2 - Station Quantities
2.4 - OK
Click
OK
.
2.3 - Add
Click
Add
to apply
settings to the Station
Information table below.