User Manual

Aimetis People Counter 2.1
Command for resetting counters Aimetis People Counter 2.1
36
Command for resetting counters
Example 8:
Command for resetting counters:
http://<CamIp>/local/VE170/reset_counters.cgi
where <CamIp> with the camera IP.
If using a browser, user might be prompted to enter user name and password.
If using Wget, enter the following command:
wget --http-user=<user> --http-passwd=<pass> http://<CamIp>/local/VE170/reset_counters.cgi
where <CamIp> with the camera IP
Important : This command does not change the counter data stored internally by the APC, only the
display feature.