Instructions / Assembly

ManualsBrandsAGROSCI ManualsGarden CenterGardenWall Kit 26 in. W x 31.5 in. H Black HDPE Plastic Wall Mounted Vertical Planter 20 Pot

POT

PARTS INCLUDED:

• Pots

• Filters

• Watering Funnels

• Mounting Racks

• Anchors

• Mounting Screws

- Item #GWK 5 has: 5 sets of pots/ﬁlters/funnels, 1 rack, 4 sets of screws/anchors

- Item #GWK 10 has: 10 sets of pots/ﬁlters/funnels, 2 racks, 8 sets of screws/anchors

- Item #GWK 20 has 20 sets of pots/ﬁlters/funnels, 4 racks, 16 sets of screws/anchors

TOOLS NEEDED:

• A Phillips head screwdriver or a screw gun

• A drill with a 7/32 bit (5 mm metric) for use with anchor only

• A small hammer

• A level

WATERING

FUNNEL

POLY GRID

Before you begin visit www.AgroSciGardenProducts.com for an

instructional video on assembling and watering your AgroSci

GardenWall

FILTER

Share your photos at @AgroGardenWall using hashtag #meandmygardenwall

AgroSci

GardenWall

Instructions

Summary of content (4 pages)

PAGE 1
AgroSci GardenWall Instructions TM TM Before you begin visit www.AgroSciGardenProducts.
PAGE 2
STEP 1: Insert funnel stems into filter cuts. Locate opening in poly grid, and insert funnel/filter through grid. Locate raised fitting in pot bottom on left of pot bottom. Insert funnel stem into fitting and push until you hear a click. Repeat for remaining pots. When mounting on stucco, siding, shingles or masonry use small hammer to tap anchors into the guide holes. When mounting on post, fence or railing, anchors unnecessary. Return rack to surface and drive in the mounting screws.
PAGE 3
PASO 1: Inserte los tallos del embudo en los cortes de filtro. Ubique la abertura en la rejilla de polietileno e inserte el embudo / filtro a través de la rejilla. Ubique el accesorio elevado en el fondo de la olla a la izquierda del fondo de la olla. Inserte el vástago del embudo en el accesorio y presione hasta que escuche un clic. Repita para las ollas restantes. Al montar sobre estuco, revestimiento, tejas o mampostería, use un martillo pequeño para golpear los anclajes en los orificios guía.
PAGE 4
ÉTAPE 1: Insérez les tiges de l’entonnoir dans les coupes du filtre. Localisez l’ouverture dans la grille poly et insérez l’entonnoir/le filtre à travers la grille. Localisez le raccord surélevé dans le fond du pot à gauche du fond du pot. Insérez la tige de l’entonnoir dans le raccord et poussez jusqu’à ce que vous entendiez un clic. Répétez l’opération pour les pots restants.