User`s guide

Table Of Contents
50 Chapter 3
Setting Up the Analyzer
Configuring Display Settings
Setting display colors
Selecting display mode
You can select the display mode of the LCD display from 2 modes: normal display
(background: black) or inverted display (background: white).
To select the display mode, use the following command:
:DISP:IMAG on page 313
Setting display color for each item
To set the display colors, use the following commands:
Resetting display colors to factory state
You can reset the display colors in normal display and inverted display to the preset factory
state.
To reset the display colors, use the following command:
:DISP:COL{1-2}:RES on page 308
Data trace :DISP:COL{1-2}:TRAC{1-4}:DATA on page 309
Memory trace :DISP:COL{1-2}:TRAC{1-4}:MEM on page 310
Graph :DISP:COL{1-2}:GRAT{1-2} on page 307
Limit test :DISP:COL{1-2}:LIM{1-2} on page 308
Background :DISP:COL{1-2}:BACK on page 306