User`s guide

Table Of Contents
Chapter 13 405
SCPI Command Reference
E5061A/E5062A commands
13. SCPI Command
Reference
:SENS{1-4}:CORR:COLL:METH:TYPE?
Syntax :SENSe{[1]|2|3|4}:CORRection:COLLect:METHod:TYPE?
Description For channel 1 (:SENS1) to channel 4 (:SENS4), reads out the calibration type selected for
calculation of the calibration coefficients. (Query only)
Query response {ERES|NONE|RESPO|RESPS|RESPT|SOLT1|SOLT2}<newline><^END>
Example of use
10 OUTPUT 717;":SENS1:CORR:COLL:METH:TYPE?"
20 ENTER 717;A$
Equivalent key No equivalent key is available on the front panel.
Description
ERES The calibration type is the enhanced response calibration.
NONE The calibration type is set to nothing.
RESPO The calibration type is the response calibration (open).
RESPS The calibration type is the response calibration (short).
RESPT The calibration type is the response calibration (thru).
SOLT1 The calibration type is the full 1-port calibration.
SOLT2 The calibration type is the full 2-port calibration.