LA-22, LA-24 & LA-27 LED-Backlit Display displays.agneovo.
TABLE OF CONTENTS Contents SAFETY INFORMATION WEEE............................................................................................................................................................ 3 PRECAUTIONS Notice............................................................................................................................................................ 4 Cautions When Setting Up.....................................................................................................
Safety Information SAFETY INFORMATION WEEE Information for users applicable in European Union countries The symbol on the product or its packaging signifies that this product has to be disposed separately from ordinary household wastes at its end of life. Please kindly be aware that this is your responsibility to dispose electronic equipment at recycling centers so as to help conserve natural resources.
Precautions PRECAUTIONS PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Symbols used in this manual This icon indicates the existence of a potential hazard that could result in personal injury or damage to the product. This icon indicates important operating and servicing information. Notice • Read this User Manual carefully before using the LCD display and keep it for future reference. • The product specifications and other information provided in this User Manual are for reference only.
PRECAUTIONS Cautions When Using Use only the power cord supplied with the LCD display. The power outlet should be installed near the LCD display and be easily accessible. If an extension cord is used with the LCD display, ensure that the total current consumption plugged into the power outlet does not exceed the ampere rating. Do not allow anything to rest on the power cord. Do not place the LCD display where the power cord may be stepped on.
PRECAUTIONS Cleaning and Maintenance Do not attempt to service the LCD display yourself, refer to qualified service personnel. Opening or removing the covers may expose you to dangerous voltage or other risks. Notice for the LCD Display In order to maintain the stable luminous performance, it is recommended to use low brightness setting. Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD display may decrease with time.
Chapter 1: Product Description CHAPTER 1: PRODUCT DESCRIPTION 1.1 Package Contents When unpacking, check if the following items are included in the package. If any of them is missing or damaged, contact your dealer. LCD Display MENU AUTO MENU MENU LA-22 AUTO LA-24 Quick Start Guide LA-27 Base LA-22, LA-24 & LA-27 Quick Start Guide LA-22, LA-24 & LA-27 LED-Backlit Display LA-22/LA-24/LA-27_Quick Guide_V010 displays.agneovo.
PRODUCT DESCRIPTION 1.2 Installation 1.2.1 Installing the Stand 1. Place the LCD display with the screen side down on a cushioned surface. 2. Attach the stand to the LCD display. a. Press firmly on the base to secure the latches on the base into the slots on the stand. b. Attach the stand to the base mount.
PRODUCT DESCRIPTION 1.2.2 Adjusting the Tilt For comfort viewing, tilt the LCD display up to an angle of 15°/20°. Hold the stand with one hand and use the other to adjust the LCD display to the desired angle. 1.2.3 -5°~ +15° -5°~ +20° LA-22 LA-24 / LA-27 Wall Mounting To wall mount the LCD display, do the following steps: 1. Remove the base stand. Please refer to page 28. 2. Remove the base mount. a. Place the LCD display with the screen side down on a cushioned surface. b1.
PRODUCT DESCRIPTION LA-24 / LA-27 3. Wall mount the LCD display. Screw the mounting bracket to the VESA holes at the rear of the LCD display. 100mm 100mm 100mm 100mm LA-22 LA-24 / LA-27 Note: Take measures to prevent the LCD display from falling down and lessen possible injury and damage to the display in case of earthquakes or other disasters. • Use only the 100 x 100 mm wall mount kit recommended by AG Neovo. All AG Neovo wall mount kits comply with VESA standard.
PRODUCT DESCRIPTION 1.3 Overview 1.3.1 Front View 1 1 MENU MENU AUTO 2 AUTO LA-22 LA-24 1 MENU AUTO 2 LA-27 1 Display screen 2 Control buttons Press the button to perform its function. For more information about each button, refer to pages 12-13.
PRODUCT DESCRIPTION 1.3.2 Control Buttons MENU AUTO MENU MENU MENU MENU AUTO LED Indicator AUTO LED Indicator LA-22 LA-24 Button Description Menu Button On Screen Display (OSD) (MENU) AUTO AUTO MENU AUTO LED Indicator LA-27 • Press to call out the OSD menu. During OSD menu • Use to confirm the selection or enter a submenu. Left / Right Button (t/u) Volume Bar • Press the u button to call out the volume bar. Audio Volume 50 Then press the t/u button to adjust the volume level.
PRODUCT DESCRIPTION Button Description Auto Button Auto Adjustment (available in VGA input only) (AUTO) Press to perform auto adjustment. This function automatically tunes the LCD display to its optimal setting, including horizontal position, vertical position, clock, and phase. When auto adjustment is initiated, the below message is displayed on the screen. Auto Adjust When the message disappears, this indicates the auto adjustment is completed.
PRODUCT DESCRIPTION 1.3.3 Rear View LA-22 7 1 1 7 LA-24 LA-27 DP HDMI VGA AUDIO IN 2 3 4 5 6 AC Power Input Use to connect the power cord. 2 DP (DisplayPort) connector Use to connect an DisplayPort cable for digital input signal. 3 HDMI connector Use to connect an HDMI cable for digital input signal. 4 VGA connector Use to connect a VGA cable for analogue input signal. 5 Audio In port (3.5mm Audio Jack) Use to connect an audio cable for audio input. 6 Head Phone (3.
Chapter 2: Making Connections CHAPTER 2: MAKING CONNECTIONS CAUTION: Make sure that the LCD display is not connected to the power outlet before making any connections. Connecting cables while the power is ON may cause possible electric shock or personal injury. 2.1 Connecting the AC Power 1. Connect the power cord to the AC power input at the rear of the LCD display. 2. Connect the plug to a power outlet or power supply. AC IN CAUTION: When unplugging the power cord, hold the power cord by the plug head.
MAKING CONNECTIONS 2.2 Connecting Input Source Signals Input source signals can be connected with either of the following cables: DP HDMI VGA • DisplayPort Connect one end of a DisplayPort cable to the DisplayPort connector of the LCD display and the other end to the DisplayPort connector of the computer. • HDMI Connect one end of an HDMI cable to the HDMI connector of the LCD display and the other end to the HDMI connector of the computer.
MAKING CONNECTIONS 2.3 Connecting Audio Devices • Audio Input Connect one end of an audio cable to the audio port of the LCD display and the other end to the audio port of the computer. AUDIO IN Audio Out • Audio Output Connect a headphone to the headphone jack of the LCD display.
Chapter 3: On Screen Display Menu CHAPTER 3: ON SCREEN DISPLAY MENU 3.1 Using the OSD Menu 1. Press the MENU button to call out the OSD window. During HDMI/DisplayPort input, Picture Setting is disabled and grey out. Contrast 78 Brightness 90 Submenu Color Temp. Auto Adjust Menu option Color Adjust 1920x1080 60Hz 2. Press the t or u button to select a menu and press the MENU button to enter the selected menu. H. Position 50 H. Position 50 V. Position 50 V.
ON SCREEN DISPLAY MENU 3.2 OSD Menu Tree Main Menu Colour Submenu Reference Contrast Refer to page 21. Brightness Color Temp. 9300 6500 5500 USER Auto Adjust Color Adjust Picture H. Position Refer to page 22. V. Position Clock Phase OSD Language English Français Deutsch Italiano Русский Spanish Portuguese 日本語 한국어 繁體中文 简体中文 OSD H. Pos. OSD V. Pos. OSD Timer Transparency 19 Refer to page 23.
ON SCREEN DISPLAY MENU Main Menu Other Submenu Reference Mode PC Refer to page 24. Vivid Movie Audio Volume Signal Source VGA HDMI DP Aspect Ratio 16:9 AUTO 4:3 Active Contrast On Off Over Drive On Off Anti Blue Light ANTI-BURN-IN Reset Reset Refer to page 25. Note: Availability of some menu items depend on the input source signal. If the menu is not available, it is disabled and greyed out.
Chapter 4: Adjusting the LCD Display CHAPTER 4: ADJUSTING THE LCD DISPLAY 4.1 Colour Setting 1. Press the MENU button to call out the OSD window. 2. Press the t or u button to select and press the MENU button to enter the Colour menu. Contrast 78 Contrast 78 Brightness 90 Brightness 90 Color Temp. Color Temp. Auto Adjust Auto Adjust Color Adjust Color Adjust 1920x1080 60Hz 1920x1080 60Hz 3. Press the t or u button to select an option and press the MENU button to enter its submenu.
ADJUSTING THE LCD DISPLAY 4.2 Picture Setting Note: This menu is only available if the input source is VGA. 1. Press the MENU button to call out the OSD window. 2. Press the t or u button to select and press the MENU button to enter the Picture menu. H. Position 50 H. Position 50 V. Position 50 V. Position 50 Clock 50 Clock 50 Phase 78 Phase 78 1920x1080 60Hz 1920x1080 60Hz 3. Press the t or u button to select an option and press the MENU button to enter its submenu.
ADJUSTING THE LCD DISPLAY 4.3 OSD Setting 1. Press the MENU button to call out the OSD window. 2. Press the t or u button to select Language and press the MENU button to enter the OSD menu. English Language English OSD H. Pos. 50 OSD H. Pos. 50 OSD V. Pos. 50 OSD V. Pos. 50 OSD Timer 10 OSD Timer 10 Transparency Transparency 0 1920x1080 60Hz 0 1920x1080 60Hz 3. Press the t or u button to select an option and press the MENU button to enter its submenu.
ADJUSTING THE LCD DISPLAY 4.4 Other Setting 1. Press the MENU button to call out the OSD window. 2. Press the t or u button to select Mode Audio Volume PC VIVID Movie Mode 50 PC VGA Aspect Ratio 16 : 9 HDMI DP AUTO 4 : 3 On Signal Source VGA Aspect Ratio 16 : 9 Active Contrast Off 1920x1080 60Hz VIVID Movie 50 Audio Volume Signal Source Active Contrast and press the MENU button to enter the Other menu. HDMI DP AUTO 4 : 3 On Off 1920x1080 60Hz 3.
ADJUSTING THE LCD DISPLAY 4.5 Reset Setting 1. Press the MENU button to call out the OSD window. 2. Press the t or u button to select and press the MENU button to enter the Reset menu. Reset Reset 1920x1080 60Hz 1920x1080 60Hz 3. Press the MENU button to restore your device to factory settings.
Chapter 5: Appendix CHAPTER 5: APPENDIX 5.1 Warning Messages When any of these warning messages appear, check the following items. Warning Message Cause The resolution or the refresh rate of Out of range √√ Change the resolution or the the graphics card of the computer refresh rate of the graphics is set too high. card. The LCD display cannot detect the No Input Signal Solution input source signal. √√ Check if the input source is turned ON. √√ Check if the signal cable is properly connected.
APPENDIX 5.2 Troubleshooting Problems No picture. • LED indicator is OFF. • LED indicator is green. Possible Cause and Solution • Check if the LCD display is turned ON. • Check if the power cord is properly connected to the LCD display. • Check if the power cord is plugged into the power outlet. • Check if the computer is turned ON. • Check if the computer is in standby mode, move the mouse or press any key to wake up the computer. Image position is incorrect. • For VGA input, adjust the H.
APPENDIX 5.3 Transporting the LCD Display To transport the LCD display for repair or shipment, place the display in its original packaging box. 1. Remove the base stand. a. Place the LCD display with the screen side down on a cushioned surface. b. Squeeze the notches with 2 fingers on the bottom of base. c. Detach the base from the base mount. d. Push the release button and detach the stand from the base mount. (LA-24, LA-27 model) LA-22 LA-24 LA-27 2. Put the LCD display inside its original plastic.
APPENDIX 5. Put the base face down on the designated vent on top of the foam cushion. 6. Put all other contents on their designated area (if necessary). 7. Close and tape the box. LA-22 LA-24 LA-27 Note: • It is recommended to use the original packaging box. • When repacking, carefully place the LCD display in its box and protect the glass panel from touching any object.
Chapter 6: Specifications CHAPTER 6: SPECIFICATIONS 6.1 Display Specifications LA-22 Panel Frequency (H/V) Input Audio Power LA-24 LA-27 Panel Type LED-Backlit TFT LCD (TN Technology) LED-Backlit TFT LCD (IPS Technology) LED-Backlit TFT LCD (VA Technology) Panel Size 21.5” 23.8” 27.0” Max. Resolution FHD 1920 x 1080 FHD 1920 x 1080 FHD 1920 x 1080 Pixel Pitch 0.248 mm 0.275 mm 0.
SPECIFICATIONS 6.2 Display Dimensions LA-22 477.8(Opening dimension) 46.0 19.6 16.6 100.0 205.5 205.5 ~15.0° -5.0° M4x10L 99.5 100.0 135.7 313.0 101.3 113.5 377.0 64.2 24.4 313.0(Outline dimension) 269.2(Opening dimension) 76.0 19.4 511.0(Outline dimension) 16.6 254.8 183.0 LA-24 528.4(Opening dimension) 46.0 13.3 -5.0° ~20.0° 227.5 100.0 20.7 146.0 80.3 93.0 100.0 140.3 339.0 433.0 94.0 339.0(Outline dimension) 298.0(Opening dimension) 23.6 227.5 M4x10L 118.4 17.
SPECIFICATIONS LA-27 612.0(Outline dimension) 608.0(Opening dimension) 46.0 12.6 2.0 256.0 100.0 -5° ~20° 256.0 M4x10L 100.0 270.0 87.0 21.0 95.0 139.4 365.0 452.0 342.0(Opening dimension) 365.0(Outline dimension) 125.6 2.0 2.0 226.0 226.0 Company Address: 5F-1, No. 3-1, Park Street, Nangang District, Taipei, 11503, Taiwan. Copyright © 2019 AG Neovo. All rights reserved.
