User's Manual Part 2

User and Deployment Guide
144
Part Name Quantity Image
PT Screw
4
Flat Head Screw
3
Plastic Anchor
3
Installation Instructions
To perform wall mounting, do the following:
1. Mark the wall, and drill holes for the plastic anchors.
1. Insert three plastic anchors into their respective holes in the wall.
2. Attach the Plastic Adapter Plate into the Wall-mount Bracket.
To do this, align the Plastic Adapter Plate's four holes with the four
respective holes in the bracket, and assemble with the four PT screws. If
using an electric drill, use caution in order not to crack the Perspex.
When assembling, take care that the Plastic Adapter Plate's orientation is in
the upright position (see picture below).
Mounting
holes and
plastic
anchors