Installation Manual

e. Remove the M6 bolt securing the washer bottle

filler neck. Also unplug the passenger side head-

light.

f. Raise the front of the vehicle with a jack. Refer

to your owner’s manual for proper jack and jack

stand placement to properly support vehicle. Sup-

port your vehicle using properly rated jack stands

before wheel removal or while working under the

vehicle.

NEVER WORK UNDER A VEHICLE WITHOUT

USING JACK STANDS.

Remove the front passenger wheel. From un-

derneath the vehicle, remove the three clips and

one screw from the inner wheel well liner. Pull

the wheel well liner back and out of the way as

shown.

g. Unplug the washer pump and washer fluid level

sensor.

h. Remove the two M6 bolts securing the washer

bottle. Unplug the hose from the washer pump

and remove the washer bottle from the vehicle.

Drain the washer fluid into a clean container and

set the washer bottle aside.